• In order to see this element you need the newer version of Flash Player
    •  

    • INFORMATION

       

      Lola - Projektovanje i mašinogradnja doo
      Jugoslovenska 2
      11250 Belgrade - Železnik
      Tel: +381-11-6571-421
      Fax:+381-11-6577-534
      E-mail: office@lola-livnica-pom.com

       

      Sales:
       
      Predrag Maksimović
      Tel:+381-11-6571-421
    •  

    •  

    • Gearboxes

    • The gearbox product range includes 16 product families of gear and worm gearboxes.

      Each family is designed and manufactured in a wide range of gear ratios, axial distances and installed power. In this way, a wide range of gearboxes in various industrial facilities is provided.

      Families of standard gearboxes were designed based on the Baukasten system principle which allows installation of standardized elements in several types and sizes of gearboxes.

      Our standard reducers are widely used in various industries, especially in steel mills, rolling mills, cement factories, power plants, mines, transportation systems, industrial equipment, etc.

      Lola has produced more than 10.000 gearboxes of various types and sizes.
       
      Production program
      Name
      Power
      Gear ratio
      Single-stage gearbox with parallel shafts
      to 2800 kW
      i=1,25-7,1
      Two-stage gearbox with parallel shafts
      to 1400 kW
      i=8-20
      Two-stage gearbox with parallel shafts - for rolling mills
      to 600 kW
      i=18
      Three-stage gearbox with parallel shafts
      to 320 kW
      i=22,4 - 200
      Three-stage gearbox with parallel shafts, shafts in a horizontal or vertical plane - for cranes
      to 200 kW
      i=10 - 63
      Four-stage gearbox with parallel shafts, shafts in a horizontal or vertical plane - for cranes
      to 16 kW
      i=100-400
      Two-stage gearbox with right-angled shafts
      to 710 kW
      i=8-31,5
      Two-stage gearbox with right-angled shafts, shafts in a vertical plane
      to 710 kW
      i=8-31,5
      Three-stage gearbox with right-angled shafts
      to 450 kW
      i=25-200
      Three-stage gearbox with right-angled shafts, shafts in a vertical plane
      to 450 kW
      i=25-200
      Two-stage gearbox with axial shafts
      to 1400 kW
      i=8-31,5
      Three-stage gearbox with axial shafts
      to 11 kW
      i=10-31,5
      Three-stage gearbox with axial shafts and electric motor
      to 11 kW
      i=22-145
      Single-stage worm gearbox, worm down
      Mo=160.000 kp.cm
      i=10-63
      Single-stage worm gearbox, worm up
      Mo=160.000 kp.cm
      i=10-63
      Specially designed gearboxes
      By customer’s specification
       

      Gearbox calculation is carried out according to DIN standards. The process of gearbox designing and documentation drafting is done using the latest software packages.

      In this area, our machinery fleet has remarkable technological capabilities.
      We produce gears of max 8000 mm diameter, module 50mm, and perform gear grinding of up to 3500 mm diameter.
    •